Free · No account · Web and Android
Peptide Calculator
A free online peptide calculator for researchers: work out reconstitution concentrations, dose volumes in insulin-syringe units and blend mixes, right here in your browser with no download. It also runs in the Peptide Library Android app, and on iPhone you can add this web page to your Home Screen.
Example
A 10 mg vial mixed with 2 mL of bacteriostatic water is 5 mg/mL. At that concentration 250 mcg is 0.05 mL, or 5 units on a U-100 insulin syringe, and the vial holds 40 measures of that size. The calculator below does the same arithmetic for any vial, water volume and amount.
This peptide calculator does three jobs. Reconstitution: enter the vial size and the bacteriostatic water you add to get the concentration in mg/mL. Dosing: enter a dose in micrograms to get the volume to draw and the units on a U-100 insulin syringe, plus doses per vial (see the dose calculator chart). Mixing: put two or more peptides in one vial and see each concentration at a shared water volume. Add a vial price and schedule for cost per dose and per milligram. Every peptide profile in the library opens the calculator with its typical vial size preloaded.
For research use only. Not medical advice. Always verify calculations and follow sterile technique in laboratory settings.
On iPhone? The calculator isn’t in the iOS App Store app, but it works here in Safari. How to use the iPhone peptide calculator. Comparing options? The best peptide calculators, compared.
Peptide dose calculator: micrograms to syringe units
The calculator above is also a peptide dose calculator (some call it a dosing or dosage calculator). Give it three numbers and it tells you how much liquid holds the amount you need:
- the vial size in mg, from the label;
- the bacteriostatic water you added, in mL;
- the dose your protocol or source states, in mcg or mg.
It returns the volume to draw in mL, the units on a U-100 insulin syringe and the number of doses in the vial. It never suggests a dose: the amount is always yours to enter, and the calculator only converts it.
dose (mg) ÷ concentration (mg/mL) × 100 = unitsDose to units chart (U-100 insulin syringe)
Units to draw for an amount at four common concentrations. The amounts are round numbers that show the scale, not doses of any peptide.
| Amount | 1 mg/mL | 2.5 mg/mL | 5 mg/mL | 10 mg/mL |
|---|---|---|---|---|
| 100 mcg | 10 units | 4 units | 2 units | 1 units |
| 250 mcg | 25 units | 10 units | 5 units | 2.5 units |
| 500 mcg | 50 units | 20 units | 10 units | 5 units |
| 1 mg | 100 units | 40 units | 20 units | 10 units |
| 2.5 mg | 250 units * | 100 units | 50 units | 25 units |
* More than a 1 mL syringe holds (100 units). Less water in the vial raises the concentration and brings the same amount back onto the barrel. In the example on this page, 250 mcg at 5 mg/mL is 5 units.
The arithmetic is worked through step by step in Dosing: a worked example. For one compound, the peptide-specific calculators list the vial sizes sold and, where a label or trial reports doses, those doses converted to units. To convert between mg, mL and units without a vial, use the insulin syringe units converter.
Peptide-specific calculators
Each has the vial sizes vendors sell for that peptide preloaded, a reconstitution chart, and (where a label or trial reports one) the cited doses converted to syringe units.
- Retatrutide dosage calculator
- Tirzepatide dosage calculator
- Semaglutide dosage calculator
- Cagrilintide calculator
- Tesamorelin calculator
- BPC-157 dosage calculator
- BPC-157 + TB-500 blend calculator
- CJC-1295 + Ipamorelin blend calculator
- GHK-Cu calculator
- MOTS-c calculator
- TB-500 calculator
- Ipamorelin calculator
- Sermorelin calculator
- SS-31 calculator
- Kisspeptin-10 calculator
- CJC-1295 with DAC calculator
- AOD-9604 calculator
- Selank calculator
- Semax calculator
- Epitalon calculator
- DSIP calculator
- PT-141 calculator
- Thymosin alpha-1 calculator
- KPV calculator
- IGF-1 LR3 calculator
- Hexarelin calculator
- GHRP-6 calculator
- Mazdutide calculator
- Insulin syringe units converter (mg, mL, units)
Choosing between tools? The best peptide calculators guide compares what each calculator works out and where it runs. On an iPhone, see how to use the peptide calculator on iPhone.
Common unit conversions
- 0.25 mg to units
- 0.5 mg to units
- 1 mg to units
- 2 mg to units
- 2.5 mg to units
- 5 mg to units
- 7.5 mg to units
- 10 mg to units
- 15 mg to units
- 100 mcg to units
- 250 mcg to units
- 500 mcg to units
- 0.1 mL to units
- 0.25 mL to units
- 0.5 mL to units
- 1 mL to units
- 5 units to mL
- 10 units to mL
- 20 units to mL
- 50 units to mL
- Units to mg
How reconstitution maths works
A lyophilised vial holds a fixed mass of peptide as dry powder. Adding bacteriostatic water dissolves it into a measurable liquid. Every figure the calculator returns comes from four pieces of arithmetic:
peptide mass (mg) ÷ water added (mL) = mg/mLdose (mg) ÷ concentration (mg/mL) = mLmL × 100 = units on a U-100 syringevial mass (mg) ÷ dose (mg) = dosesDoses are often quoted in micrograms. Divide by 1000 to convert micrograms to milligrams before using these formulas — 250 mcg is 0.25 mg.
How to reconstitute a peptide in five steps
Reconstitution means dissolving the lyophilised powder in bacteriostatic water so a dose can be measured by volume. The steps are the same for every peptide; only the vial size and the water volume change.
- 1Check the vial size and choose a water volume
Read the peptide mass on the vial label (the example uses 10 mg) and decide how much bacteriostatic water to add. 2 mL gives 5 mg/mL; more water means a lower concentration and a larger, easier-to-read draw for the same dose.
- 2Prepare both vials
Let the peptide vial and the bacteriostatic water reach room temperature. Swab both rubber stoppers with an alcohol wipe and let them dry.
- 3Draw the water
Draw the chosen volume of bacteriostatic water into a sterile syringe. On a U-100 insulin syringe, 2 mL is 200 units.
- 4Add the water slowly down the vial wall
Insert the needle through the stopper and aim the stream at the glass, not at the powder, so the peptide dissolves gently. Swirl or roll the vial until the solution is clear. Do not shake.
- 5Label the vial and calculate the dose
Write the date and the concentration (for example "5 mg/mL") on the vial and refrigerate it. Enter the concentration and a dose in micrograms above to get the syringe units: 250 mcg at 5 mg/mL is 5 units.
Storage after reconstitution is covered in how to store peptides before and after reconstitution.
Dosing: a worked example
Reconstituting a 10 mg vial with 2 mL of bacteriostatic water, then drawing a 250 mcg dose:
- 1Concentration
10 mg ÷ 2 mL = 5 mg/mL - 2Dose in mg
250 mcg ÷ 1000 = 0.25 mg - 3Volume to draw
0.25 mg ÷ 5 mg/mL = 0.05 mL - 4Syringe units
0.05 mL × 100 = 5 units - 5Doses per vial
10 mg ÷ 0.25 mg = 40 doses
At 5 units the draw sits near the bottom of the barrel, where each mark is hardest to read. Using 4 mL of water instead halves the concentration and doubles the draw to 10 units — the same 250 mcg, measured more precisely.
Reading the syringe
Insulin syringes are marked in units rather than millilitres. U-100 means 100 units to 1 mL, so one unit is 0.01 mL regardless of barrel size. A larger barrel does not change what a unit means — it changes how much you can draw and how far apart the marks sit.
| Barrel | Holds | Best for |
|---|---|---|
| 0.3 mL | 30 units | Small draws under 30 units, where each mark is easiest to read |
| 0.5 mL | 50 units | Mid-range draws; the usual compromise between range and precision |
| 1.0 mL | 100 units | Larger draws, or dilute preparations needing more volume |
Mixing: blends in one vial
When two peptides are reconstituted together they share the water volume but keep separate concentrations, because each has its own mass. A single draw therefore delivers both in a fixed ratio. The calculator's blend mode applies the same arithmetic to each peptide at the shared volume:
mass A (mg) ÷ shared water (mL) = mg/mL of Amass B (mg) ÷ shared water (mL) = mg/mL of B(mg/mL ÷ 100) of each = mg of each per unitChoose the water volume so the peptide with the tighter dosing requirement lands on a readable syringe mark, then check what the second peptide works out to at that volume.
Which peptides are commonly combined, and what is and is not known about each combination, is catalogued in the peptide stacks directory. Chemical compatibility in a shared vial is a separate question from the arithmetic above and is rarely established.
Cost per dose and per milligram
Vial price on its own says nothing useful, because vials differ in size. Dividing price by the milligrams inside gives a figure that compares across vendors, and dividing price by doses per vial gives what a single dose actually costs. The 10 mg vial above at $60 works out at $6.00 per mg and $1.50 per 250 mcg dose.
The vendor comparison lists price per mg across suppliers, and each peptide profile records typical vial sizes and half-life.
Common questions
What is a peptide calculator?
A peptide calculator converts between the three ways a research peptide dose is expressed: mass (mg or mcg), concentration (mg/mL after reconstitution) and volume (mL, or units on an insulin syringe). Enter the vial size, the bacteriostatic water added and the intended dose, and it returns the concentration, the volume to draw, the syringe units, the doses per vial and, if a price is entered, the cost per dose.
What does a peptide dose calculator do?
A peptide dose calculator, also called a dosing or dosage calculator, turns an amount of peptide into something you can measure. Enter the vial size, the bacteriostatic water added and the dose stated by your protocol or source, and it returns the volume in mL, the units on a U-100 insulin syringe and how many doses the vial holds. It does not recommend a dose: it only converts the amount you enter. For 250 mcg from a 10 mg vial mixed with 2 mL, the answer is 0.05 mL, or 5 units.
Is there a peptide calculator app?
Yes on Android: the Peptide Library Android app includes this calculator. The Peptide Library iPhone app does not include a calculator, so on an iPhone you use this page in Safari and can add it to the Home Screen, where it opens like an app. The web calculator is free and needs no account or download on any device.
What is a peptide mixing calculator?
A mixing calculator handles two or more peptides reconstituted in the same vial. Each peptide keeps its own concentration (its own mass divided by the shared water volume), so one draw delivers a fixed ratio of both. The mixing mode on this page lets you set the water volume once and see what each peptide works out to per unit drawn.
Can I start the calculator from a peptide profile?
Yes. Every profile in the peptide library links to this calculator with that peptide preselected, which loads its typical vial size and reconstitution volume as a starting point. You can change any value afterwards; the preset only saves typing.
Does adding more bacteriostatic water change the dose?
No. The vial contains a fixed mass of peptide, and adding water does not create or remove any of it. More water lowers the concentration, so the same dose is carried in a larger volume and you draw to a higher mark on the syringe. Less water raises the concentration and the same dose sits at a lower mark. The milligrams delivered are identical either way — only the volume changes.
How much bacteriostatic water should I add to a peptide vial?
There is no single correct amount. Choose the volume that puts your intended dose on a syringe mark you can read accurately. A common approach is to pick a round concentration — reconstituting a 10 mg vial with 2 mL gives 5 mg/mL — then check where a typical dose lands. If it falls below about 5 units on a U-100 syringe, add more water so the draw is larger and easier to measure precisely.
How do I convert a dose in micrograms to insulin syringe units?
Convert the dose to milligrams by dividing micrograms by 1000, divide that by the concentration in mg/mL to get the volume in mL, then multiply by 100 because a U-100 syringe is graduated at 100 units per mL. For a 250 mcg dose from a 5 mg/mL vial: 250 ÷ 1000 = 0.25 mg, 0.25 ÷ 5 = 0.05 mL, 0.05 × 100 = 5 units.
How many doses are in a vial?
Divide the total mass in the vial by the mass of one dose, using the same unit for both. A 10 mg vial dosed at 250 mcg gives 10 ÷ 0.25 = 40 doses. The water volume does not affect this number, because it does not change how much peptide is present.
How do I work out cost per dose?
Divide the vial price by the number of doses it contains. A 10 mg vial costing $60 and yielding 40 doses works out at $1.50 per dose. Comparing cost per milligram rather than per vial is the only way to compare vendors whose vials come in different sizes.
How is a blend of two peptides calculated?
Both peptides sit in the same vial and share the same water volume, so each has its own concentration derived from its own mass. Once you fix the water volume, the ratio between the two doses is fixed too — a single draw delivers both. Pick the water volume so that the peptide with the tighter dosing requirement lands on a readable mark, then check what the second peptide works out to at that same volume.
What does mg/mL mean on a reconstituted vial?
It is the concentration: how many milligrams of peptide are dissolved in each millilitre of liquid. It is the bridge between a dose expressed as a mass and a volume you can actually draw into a syringe. Every other figure on this page derives from it.